产品 资讯
请输入产品名称
噪声分析仪 纺织检测仪器 Toc分析仪 PT-303红外测温仪 转矩测试仪 继电保护试验仪 定氮仪
首页 产品 专题 品牌 资料 展会 成功案例 网上展会
词多 效果好 就选易搜宝！
首页 >>> 技术文章 >

技术文章

日本SENTEC高精度位移传感器LS-500技术资料

日本SENTEC高精度位移传感器LS-500技术资料

High Accuracy Displacement Sensor(Standard)

Application is expanded with Hold Function.



Features

? Strong against temperature influence keeping high accuracy.
? Measure 0.3 um displacement (LS-500SP series).
? Response follows at 10kHz (LS-500SS series).
? Built-in Hold Function.
? High performance of environmental duration.
? The controller housing is subject to DIN standard.


HA-20S ~ 80S



HA-162S


HA-222S



HA-225S



HA-101S,141S



*1:CE Marking Correspondence article. EMC directive (89/336/EEC):EN61000-6-4(EMI), EN61000-6-2(EMS). The test is not applicate to D.C power input ports intended to be
permanently connected to cables less than in 10m length. Please make into a length of less than 10m the code which connects a controller with a direct-current power supply.
*2:An adjustment subject serves as only iron.
*3:There is no compatibility between Sensors-Head. Change of the length of the code of a sensor changes the characteristic.(The standard length is 3m.) When length is
changed, please ask to the marketing department of our company.
*4:It is the case where an adjustment subject is iron.
*5:Set to ±2% of F.S, when an abjustment subject is not iron.
*6:LPF(Low Pass Filter)the static minimum at the time of use - it is resolution Please specify SP type of an option. A standard machine is of F.S 0.1% (1μm of resolution
[Minimum]).
*7:Please specify SS type of an option.
*8:CONTROLLER : 0.02% of F.S/°C,SENSOR-HEAD:0.04% of F.S/°C
*9:It is the case where the length of coaxial cable the same axle of a sensor head is standard specification (3m), and an adjustment subject is iron.
*10:One option corresponding to each type - mark can be chosen.
About an option function
SS (High Response) : Frequency Response is DC ~ 10kHz (-3dB).*9
SP (High Resolution) : Resolution is 0.03% of F.S(minimum 0.3μm).Frequency Response is DC ~ 1.3kHz (-3dB)
P (Peak Hold output) : The maximum of an output is outputted from an option terminal by closing a synchronous terminal.
B (Bottom Hold output) : The minimum of an output is outputted from an option terminal by closing a synchronous terminal.
F (Amplituide Hold output) : The difference of the maximum and the minimum value outputs from an option terminal by closing a synchronous terminal.
*11:Absolute Output and Hold Output are 1/10 and 0 ~ 1V
*12?*13:HA80S and 80YS for LS-500-2A, LS500D-2A and HA-101S for LS-500-2B and LS-500D-2B
*14?*15:HA-141S for LS-500-4A and LS500D-4A, HA-225S for LS-500-4B and LS-500D-4B.
OPERATING TEMPERATURE
STABILITY
OUTPUT IMPEDANCE
RESPONSE
RESOLUTION
LINEARITY
OUTPUT VOLTAGE
MEASURING RANGE*3
ITEM
AC-TYPE
CONTROLLER
DC-TYPE*1
SENSOR
0 ~ 0.4mm
0 ~ 0.4V
±2% of F.S
*8
0 ~ 0.8mm
0 ~ 0.8V
0 ~ 1mm
0 ~ 1V
0 ~ 2mm
0 ~ 2V
0 ~ 3.5mm
0 ~ 3.5V
0 ~ 5mm
0 ~ 5V
0 ~ 10mm
0 ~ 10V
±1% of F.S*5
0.03% of F.S(0.3μm ,minimum)*6
DC ~ 10kHz(－3dB)*7
52Ω
CONTROLLER : －10 ~ 60°C　SENSOR HEAD : －20 ~ 70°C　85%RH or less ,no condensation
AC100/200V ±15% 50/60Hz
3VA or less
LS-500-04*2
HA-20S
LS-500-08
HA-30S
HA-30YS
LS-500-1
HA-50S
HA-50YS
*12?*13
LS-500-2A?2B
HA-80S*12
HA-80YS*12
HA-101S*13
*14?*15
LS-500-4A?4B
HA-141S*14
HA-225S*15
LS-500-5
HA-162S
LS-500-10
LS-500D-04*2 LS-500D-08 LS-500D-1
*12?*13
LS-500D-2A?2B
*14?*15
LS-500D-4A?4B LS-500D-5 LS-500D-10
HA-222S
DC12－24V ±15% ripple 10% or less
150mA or less
CONTROLLER : 0.01% of F.S/°C　SENSOR HEAD : 0.02% of F.S/°C *9
• LS-500(AC-type) • • LS-500D(DC-type)
上一篇：英国莫伯雷MOBREY外浮筒式磁性浮球液位开关
下一篇：国庆热荐：日本胜铁克SENTEC光电传感器FMS-112