国庆热荐:日本胜铁克SENTEC光电传感器FMS-112
国庆热荐:日本胜铁克SENTEC光电传感器FMS-112
BUILT-IN AMPLIFIER TYPE METAL PASS SENSOR
■TYPE
FMS-112-□□-□
SENSOR BORE-□□:
10:∮10mm
12:∮12mm
15:∮15mm
20:∮20mm
OFF DELAY TIMER(accuracy:±25%)-□:
None: 0 sec (standard)
1 : 0.1 sec (optional)
2 : 0.2 sec (optional)
3 : 0.3 sec (optional)
■SPECIFICATIONS(SENTEC)
*Remarks:JIS chrome plating brass nut or similar made of non-ferrous material.
Model:FMS-112-10
Mains power:12Vdc~24Vdc ±20% (ripple:10% or less)
Current consumption:20mA or less
Sensitivity ad justment:Single-turn trimmer
Alarm output:NPN open-conllector,40Vdc 100mA max.
Output protection:Zener barrier
Response time:1ms
Sensor bore:∮10mm
Minimum target(Remarks):M2.6 nut
Off delay function:0 sec (std.) , but 0.1,0.2,0.5 sec (opt.)
Operating temperature:-10~60℃ , no-condensing
Model:FMS-112-12
Mains power:12Vdc~24Vdc ±20% (ripple:10% or less)
Current consumption:20mA or less
Sensitivity ad justment:Single-turn trimmer
Alarm output:NPN open-conllector,40Vdc 100mA max.
Output protection:Zener barrier
Response time:1ms
Sensor bore:∮12mm
Minimum target(Remarks):M2.6 nut
Off delay function:0 sec (std.) , but 0.1,0.2,0.5 sec (opt.)
Operating temperature:-10~60℃ , no-condensing
Model:FMS-112-15
Mains power:12Vdc~24Vdc ±20% (ripple:10% or less)
Current consumption:20mA or less
Sensitivity ad justment:Single-turn trimmer
Alarm output:NPN open-conllector,40Vdc 100mA max.
Output protection:Zener barrier
Response time:1ms
Sensor bore:∮15mm
Minimum target(Remarks):M2.6 nut
Off delay function:0 sec (std.) , but 0.1,0.2,0.5 sec (opt.)
Operating temperature:-10~60℃ , no-condensing
Model:FMS-112-20
Mains power:12Vdc~24Vdc ±20% (ripple:10% or less)
Current consumption:20mA or less
Sensitivity ad justment:Single-turn trimmer
Alarm output:NPN open-conllector,40Vdc 100mA max.
Output protection:Zener barrier
Response time:1ms
Sensor bore:∮20mm
Minimum target(Remarks):M3.0 nut
Off delay function:0 sec (std.) , but 0.1,0.2,0.5 sec (opt.)
Operating temperature:-10~60℃ , no-condensing
■CAUTION IN USE
★Securely mount the sensor with screws to avoid misoperation.
★DO NOT use the sensor for positioning control,since the presence of a target in the sensor keeps alarm on.
★Any interconnecting cable up to 10Ω in cable resistance is suitable.