Panterra Sensor
Panterra是支持多种化学品和技术的一系列检测智能气体探测器。
产品家族的成员按传感器类型是有区别的,选择根据使用要求和目标类型的传感环境而定(如湿度条件下厌氧和零)。
Supported sensor types include thermal conductivity, metal-oxide semiconductor (MOS), electrochemical, catalytic (pellistor), and acoustic devices.
The detectors are offered as self-contained units or with extendable sensing heads.
Power consumption varies according to sensor type from 100mW to 1W. Input powering options are 5VDC (regulated) or 7-40VDC / 7-60VDC (unregulated).
Specification Information
- One common interface for several sensor/gas types
- 10-bit auto-ranging sensor sampling system
- Normal, Warning, Alarm & Error states
- Bi-color LED status indicator
- Optional NO or NC dry relay
- Auto-resetting or latching operation
- Optional 0-to-5V proportional output (10 bits)
- Optional binary operation (TTL output)
- Optional voltage encoded state output (analog)
- Optional alarm beeper
- PK-Port™ compatible digital communications
- User-settable alarm/warning via PK-Port™
- Digital FLASH-based calibration
- Each device factory pre-calibrated
- Field re-programmable firmware
- Active temperature compensation (as required)
- Sensor & temperature error detection
- Optional extendable sensor head
- 5VDC, 7-40VDC or 7-60VDC input power
- 500 mW operating power (typical)
Action Level Options:
Alarm level specified as "PN-Sx-Gyy-Annn", where:
"x" is the sensor type code (EG "ST" denotes thermal conductivity)
"yy" is the target gas code (EG "GOX" implies oxygen)
"nnn" is alarm level (% of sensing range)
Warning level specified as "Wpp" where "pp" is percentage of sensing range
Error Handling Options:
1. Audio-visual indication of errors [E1]
2. Errors trigger alarms (fail safe) [E2]<!--[endif]-->
Overdose Handling Options:
(Applies to MOS hydrogen sensor only)
1. Failure to hypersensitivity [X1]
2. Failure to persistent error state [X2]
Output Signal Option:
1. TTL - Norm.-high, Auto (self-clearing) [O1]
2. TTL - Norm.-low, Auto (self-clearing) [O2]
3. TTL - Norm.-high, Latch (Button reset) [O3]
4. TTL - Norm.-low, Latch (Button reset) [O4]
5. Proportional output - 0 to 5VDC [O5]
0.5V safety offset (zero reading)
1000 steps of 4.9mV each
Each step equals one resolution unit
6. State step - 0 to 5VDC [O6]
Relay Options
1. Relay not required [R0]
2. Normally-closed, Auto (self-clearing) [R1]
3. Normally-open, Auto (self-clearing) [R2]
4. Normally-closed, Latch (Button reset) [R3]
5. Normally-open, Latch (Button reset) [R4]
Specify relay to respond to warning state, alarm state, or both.
<!--[endif]-->
Audio Sounder Options
1. No beeper [S0]
2. Included beeper [S1]
Enclosure Options
1. Open-frame (Circuit board only) [P0]
2. Anodized aluminum case (No flange) [P1]
3. Anodized aluminum case (With flange) [P2]
Sensor Placement Options
Sensor heads can be housed within the control unit or can be extended via a cable. Extended sensors are house in a flanged aluminum enclosure.
1. No sensor extension [L0]
2. Sensor extended "n" meters [Ln]
Powering Options
1. 5 VDC (+/- 5%) [I1]
2. 7-to-40 VDC switch mode PSU [I2]
3. 7-to-60 VDC switch mode PSU [I3]
Accessories
Evaluation kit
|
KnowzNet™
|
|
|
|
H-Tech Shipping Information
Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 14 days
• Shipping origin: Vancouver, Canada
Please contact us for pricing on this product.
H-Tech's Shipping Policy
- 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
- 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报