7126 耐压、绝缘、接地综合安规测试仪 7126 耐压、绝缘、接地综合安规测试仪

点击查看大图

产品价格： < 面议

产品型号：7126 耐压、绝缘、接地综合安规测试仪

品牌：其它品牌

公司名称：珠海安联电子有限公司

所在地：广东珠海

发布时间：2008-08-16

浏览次数：2822 次

立即询价在线咨询

产品简介

特点：    微电脑数字式设计，软件式参数设定，人性化操作    电压缓升功能，符合国际安规要求    多种项目测试，一键轻松完成    可选择50/60Hz测试    测试记忆组功能    PLC遥控功能

产品详细信息

7126耐压、绝缘、接地综合安规测试仪

INPUT
Voltage	115/230 VAC ± 10%, User selection
Frequency	50/60 Hz ± 5%
Fuse	6.3 Amp 250V Slo-Blo
DIELECTRIC WITHSTAND TEST MODE
Output Rating	5 KV @ 20mA AC
Output Rating	6 KV @ 5 mA DC
Output Adjustment	Range:	0-5 KV AC, 0-6 KV DC
	Resolution:	10 volt/step
	Accuracy:	± (2% of setting + 5 volts)
Voltage Display	Range:	0 - 5 KVAC / 0-6KV DC
	Resolution:	10 volt/step
	Accuracy:	± (2% of reading + 10 volts)
HI / LO -Limit AC	Range:	0.00 - 20.00 mA
	Resolution:	0.01 mA/step
	Accuracy:	± (2% of setting + 0.02 mA)
AC Current Display	Range:	0.00 - 20.00 mA
	Resolution:	0.01 mA/step
	Accuracy:	± (2% of reading + 0.02 mA)
HI / LO -Limit DC	Range:	0.00 - 5.00 mA
	Resolution:	0.01 mA/step
	Accuracy:	± (2% of setting + 0.02 mA)
DC Current Display	Range:	0.00 - 5.00 mA
	Resolution:	0.01 mA/step
	Accuracy:	± (2% of reading + 0.02 mA)
Failure Detector	Audible and Visual
Output Ripple	< 5% (6KVDC/5 mA at Resistive Load)
Discharge Time	≦ 200 ms
Maximum Capacitive Load in DC Mode	1µF < 1KV , 0.75µF < 2KV, 0.5µF < 3KV, 0.08µF < 4KV, 0.04µF < 5KV, 0.01µF < 6KV
AC Wave Form	Sine wave Distortion : < 2% THD ; Crest Factor= 1.3 – 1.5
Output Frequency	Range:	60 or 50 Hz, User Selection
Output Regulation	± (1 % of output + 5 volts) from no load to full load
Dwell Timer	Range:	0, 0.2 - 999.9 sec, (0 = Constant)
	Resolution:	0.1 sec increments
	Accuracy:	± (0.1% + 0.05 sec)
Ramp Timer	Range:	0.1 - 999.9 sec
	Resolution:	0.1 sec increments
	Accuracy	± (0.1% + 0.05 sec)
INSULATION RESISTANCE TEST MODE
Output Voltage	Range:	100 - 1000 Volts DC
	Resolution:	1 volt/step
	Accuracy:	± (2% of reading + 5 volts)
Voltage Display	Range:	0 - 1000 V
	Resolution:	1 volt/step
	Accuracy:	± (2% of reading + 2 counts)
Resistance Display	Range:	1 - 1000 MΩ (4 Digit, Auto Ranging)
	Resolution:	0.01/0.1 MΩ
	Accuracy:	± (3% of reading + 2 counts) at test voltage > 500V
	Accuracy:	± (7% of reading +2 counts) at test voltage < 500V
HI-Limit	Range:	0, 1 - 1000 M Ω (0 = Off)
LO-Limit	Range:	1 - 1000 M Ω
Delay Timer	Range:	0, 0.5 - 999.9 sec (0 = Constant)
	Resolution:	0.1 sec/step
	Accuracy:	± (0.1% + 0.05 sec)
GROUND BOND TEST MODE
Output Voltage	Range:	AC 6 volts Max.
Output Frequency	Range:	60 or 50 Hz, User Selection
Output Frequency	Accuracy:	±0.1%
Output Current	Range:	3.0 - 30.0 Amps AC
	Resolution:	0.1 Amp/step
	Accuracy :	± (2 % of setting + 0.1A)
Current Display	Range:	0.0 - 30.0 Amps
	Resolution:	0.1 Amp/step
	Accuracy:	± (3 % of reading + 0.1A)
Resistance HI-Limit	Range:	0 - 510 mΩ
Resistance Display	Range:	0 – 510 mΩ for 0.0 – 10.0 Amps
		0 – 200 mΩ for 10.1 – 25.0 Amps
		0 – 150 mΩ for 25.1 – 30.0 Amps
	Resolution:	1 mΩ/step
	Accuracy:	± (2 % of Setting + 2 mΩ )
Dwell Timer	Range:	0, 0.5 - 999.9 sec (0 = Constant)
	Resolution:	0.1 sec/step
	Accuracy:	± (0.1% + 0.05 sec)
Lead Resistance Offset	Max. Offset Capability:	100 mΩ
	Resolution:	1 mΩ / step
	Accuracy:	± (2 % of Setting + 2 mΩ )
GENERAL SPECIFICATIONS
PLC Remote Control	Input - Test, Reset, Interlock & Recall Memory 1 - 6
PLC Remote Control	Output - Pass, Fail, Test-in-Process
Memory	Allows storage of up to 6 different test programs and 6 step/each memory and single step mode.
Security	Lockout capability to avoid unauthorized access to test set-up programs.
Calibration	Software and adjustments are made through front panel.
Mechanical	Bench or rack mount with tilt up front feet.
Optional Arc Detection Hardware	ACW and DCW; Software adjustable Arc Level 0-9
Dimension	280(W) x 89(H) x 430(D) mm
Weight	33 lbs. (15 kg)