美国FLUKE (价格优惠）
如果您对该产品感兴趣的话,可以
产品名称:
美国FLUKE (价格优惠）
产品型号:
PM 9604 GPIB 接口
产品展商:
肯强仪器有限公司
简单介绍
美国FLUKE PM 9604 GPIB 接口(价格优惠）
美国FLUKE (价格优惠）的详细介绍
美国FLUKE PM 9604 GPIB 接口(价格优惠）| General Specifications | | Programming code format | | | 7-bit ISO code (ASCII) characters. Upper or lower case characters. |
| | Input separator | | | The counter accepts the following separators: ETX, ETB, CR, LF, ' '(space), ',' (comma), ':' (colon) ';' (semicolon) |
| | Output data separator | | | Default separator at power-on is LF. The separator can be programmed to any non-printable ASCII-code with decimal equivalent 0-31, except 27 (ESC). The combination 13 + 10 (CR + LF) can be programmed. The EOI line can be programmed to be active together with the last output byte sent. |
| | Output format | | Normal: | 20 characters plus separators(s) 7 characters alphabetic header plus 13 characters numeric value | | Short output: | Alphabetic header and leading zeroes are omitted. |
| | High-speed dump | | | The contents of internal registers are transferred to the controller, without being processed by the counter. The processing must be done in the controller instead. | | Max output rate: | approx 100 readings/s | | Output format: | A 2 character header, followed by 12 Hex-digits plus separator(s) |
| | Max data output rate | | Normal mode: | Approx 5 readings/s | | High-speed dump: | Approx 100 readings/s |
| | Output time for measuring data | | Normal mode: | Approx 15 rms (20 bytes) | | High speed mode: | Approx 6 ms (15 bytes) |
| | Response time for addressing | | | Response time for trigger command (GET) | | | Typical read time for programming data | |
|
|  |
|
美国FLUKE PM 9604 GPIB 接口(价格优惠）