MS8910 SMD测试仪自动识别片状电阻电容 外贸爆款
术指标：
功能
量 程
分辨率
精度
电 阻
300Ω/3KΩ/30K/300K/
3MΩ
30MΩ
0.1Ω
±(1%rdg+ 2dgt)
“
±(1.2rd%+3dgt)
电 容
3nF/30nF/
300nF/
3uF/30uF/
300uF/3mF/
30mF
1pF
±(2.5%rdg+ 3dgt)
±(3%rdg+ 3dgt)
二极管
开路电压: 2.8V
测试电流t : 2mA
通断
电阻值小于30Ω,
蜂鸣器就响。
附件: 备份测试针：2个
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD （Surface Mounting
Device), there are Chip type resistor, Chip type capacitor and diode, for example. Moreover, the Tester have the continuity checking function
The Tester is automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection. The Tester is designed to meet IEC1010-1 standard and Stipulation of 2-Poulation Grade. The Tester conform to the European Union’s following Requirement: CE regulation 89/336 (EMC Electromagnetic Compatibility）。
The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
This operating instruction covers information on safety and caution, so please read relevant information carefully and observe all the warming and note strictly.
Features:
MS8910 SMD测试仪自动识别片状电阻电容 外贸爆款 MS8910 SMD测试仪自动识别片状电阻电容 外贸爆款