|
|
|
Bridge power supply
|
DC12 V±0.3 V within 280 mA
|
|
Applicable transducer
|
Up to 8 units of Minebea's digital load cells are connectable.
|
|
Input interface
|
RS-485 (2-wires method)
|
|
Baud rate
|
56 700 bps
|
|
Termination
|
Externally *Terminating resistance must use 120 ohms.
|
|
Digital display range
|
- 99 999 ~ 99 999 (Changeable to x2, x5, x10, x20 or x50)
|
|
Display unit
|
7 segment red LED with 14.2 mm character height.
|
|
Over display
|
'-OL' display at minus(-) over, and 'OL' display at plus(+) over
|
|
A/D value over display
|
'-OVF' display at minus(-) over, and 'OVF' display at plus(+) over.
|
|
Status display
|
STAB, TARE, GROSS, NET, ZERO, HOLD
|
|
Judgement display
|
S1, S2, S3, S4, S5
|
|
Display rate
|
15 times/s (Changeable to 5 times/s.)
|
|
Display of decimal point
|
Changeable to no display, 101, 102, 103, 104.
|
|
External control function
|
ON/OFF, SET, TARE, NET/GROSS, ZERO, PRINT, NET display, HOLD display.
|
|
Comparator function
|
|
|
Display range
|
-99 999 ~ 99 999
(0 ~ 99 999 for flow mode and discharge mode.)
|
|
No.of set points
|
5 points of S1, S2, S3, S4 and S5.
|
|
Set value of hysteresis data width
|
0 ~ 99 digit
|
|
Hysteresis direction
|
Changeable to either 'On-delay' or 'Off-delay'
|
|
Comparator conversion rate
|
Changeable to 5 times/s or 15 times/s.
(Synchronized with display rate.)
|
|
RS-232C interface
|
Baud rate : Selectable from 1 200 bps, 2 400 bps, 4 800 bps or 9 600 bps.
Data bit length : Selectable from 7 bit or 8 bit.
Parity bit : Selectable from none, even or odd.
Stop bit : Selectable from 1 bit or 2 bit.
Terminator : Selectable from CR + LF or CR.
Communication method : Half duplex
Synchronous method : Start-stop synchronous method
Transmission data : ASCII code
Cable length : Upto 15 m
Signal name : TXD, RXD, COM.1
|
|
Operating temp./humidity range
|
Temperature - 10 ℃ ~ 50 ℃
Humidity 85 % or less (Non condensing)
|
|
Power supply
|
AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz
|
|
Power consumption
|
Approx. 13 VA (without any options at AC100 V )
Approx. 15 VA (with options at AC100 V)
|
|
Weight
|
Approx. 0.3 kg (without options)
|
|
Dimension (W x H x D)
|
96 mm x 48 mm x 120 mm
|
|
Protection code
|
IP65 (Only for the fron panel when the attached panel mounting gascket is installed.
|