| SPECTRUM ANALYZER - SEE AND HEAR™ |
| Frequency Range: |
400 kHz to GHz |
| Dispersion: |
Selectable from keypad per following:
200 kHz window - (20 kHz per div)
500 kHz window - (50 kHz per div)
1 MHz window - (100 kHz per div)
2 MHz window - (200 kHz per div)
5 MHz window - (500 kHz per div)
10 MHz window - (1 MHz per div) |
| Optional: |
20 MHz window - (2 MHz per div)*
50 MHz window - (5 MHz per div)*
100 MHz window - (10 MHz per div)*
* SEE AND HEARª not functional |
| Dynamic Range |
60dB |
| Bandwidth: |
Automatically selected:
6 kHz - (100 kHz per division & below)
30 kHz - (200 kHz per division & below) |
| Display Range: |
+50 to -95 dBm |
| Optional Markers: |
Freeze, Max Hold, Peak Hold Delta or Absolute level and frequency |
| |
|
| SIGNAL STRENGTH INDICATOR |
| Range: |
3 MHz to 1 GHz |
| Accuracy: |
±4 dB |
| Sensitivity: |
-100 dBm (antenna port rating) |
| |
|
| WATTMETER (RF I/O PORT) |
| Frequency Range: |
3 MHz to 1 GHz |
| Measurement Range: |
.1 watt to 125 watts |
| Input Impedance: |
Input Impedance: 50 ohms with maximum VSWR of 1.5:1 |
| Accuracy: |
±10% |
| Protection: |
Over temperature alarms |
| |
|
| TRACKING GENERATOR |
| Frequency Range: |
400 kHz to 1 GHz |
| Tracking Display Sweep Range: |
200 kHz window - (20 kHz per div)
500 kHz window - (50 kHz per div)
1 MHz window - (100 kHz per div)
2 MHz window - (200 kHz per div)
5 MHz window - (500 kHz per div)
10 MHz window - (1 MHz per div)
20 MHz window - (2 MHz per div)
50 MHz window - (5 MHz per div) |
| Display Range: |
0 to -80 dBm |
| |
|
| CABLE FAULT (Optional) |
| Method: |
Standing Wave Analysis |
| Measure: |
Fault distance, cable length |
| Reading: |
Feet and meters |
| Accuracy: |
10% |
| |
|
| OSCILLOSCOPE |
| CRT Size: |
9 cm x 11 cm (approx. 7 inch diagonal) raster scan display with four intensity levels |
| Frequency Response: |
0 to 50 kHz |
| Vertical Input Ranges: |
Selectable per the following:
10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1v, 2v, 5v, 10v per division |
| Accuracy: |
5% of full scale all ranges |
| Sweep Ranges: |
Selectable per the following:
20 usec, 50 usec, 100 usec, 200 usec, 500 usec, 1 msec, 2 msec, 5 msec, 10 msec, 20 msec, 50 msec, 100 msec, 200 msec, 500 msec, 1 sec per division |
| Trigger: |
Automatic, normal and single sweep |
| Optional Markers: |
Delta Voltage, Delta Frequency, Delta Period |
| |
|
| DIGITAL VOLTMETER |
| Meter Type: |
RMS |
| Frequency Range: |
DC plus AC of 50 Hz to 20 kHz |
| DC Voltage Ranges: |
1.0V, 10.0 V, 100 V full scale |
| Accuracy: |
1% full scale ±1 least significant digit |
| |
|
| AC Voltage Ranges: |
1.0V, 10.0 V, 70 V full scale |
| Accuracy: |
5% full scale ±1 least significant digit |
| |
|
| Freq. Response: |
3 dB end points @ 50 Hz and 20 kHz |
| |
|
| FREQUENCY COUNTER |
| Frequency Range: |
5 Hz to 500 kHz plus Auto Tune |
| Period Counter Range: |
5 Hz to 20 kHz |
| Input Level:: |
.1 v RMS minimum input level |
| Resolution: |
.1 Hz, 1 Hz, 10 Hz, 100 Hz and 1 kHz varying by frequency range |
| Auto Tune: |
Monitor mode, 20 MHz to 1 GHz unit will scan and find signals greater than -30 dBm |
| Accuracy: |
See TIME BASE |
| |
|
| SINAD / DISTORTION METER |
| Input Level: |
.1 V to 10 V RMS |
| SINAD Accuracy: |
±1 dB at 12 dB SINAD |
| Distortion Range: |
1% to 20% |
| Distortion Accuracy: |
±0.5% of distortion of ±10% of reading whichever is greater |
| Optional: |
C-Message Filter; CCITT Filter w/600 ohm switchable load |
| |
|
| TONE SEQUENCE DECODE |
| Modulation Types: |
PRIVATE LINE, DIGITAL PRIVATE LINE, Single Tone, DTMF, Two-Tone Paging, 5/6 Tone Paging, International Select V, 20 Tone General Sequence. |
| Frequency Accuracy: |
±3% from 300 Hz to 3 kHz |
| Duration Accuracy: |
±12 msec for tones greater than 30 msec and 300 Hz |
| |
|
| RS232 PORT (Requires special cable)/Optional IEEE-488 Bi-directional port provided with capability to respond to serial (optional parallel) input command vocabulary to activate functions and return measured results. Baud rates to 9600 BPS with selectable start and parity bits. |
| |
|
| TIME BASE |
|
| Standard TCXO: |
Aging 1 ppm/yr, Temperature 1 ppm |
| Optional OCXO: |
Aging .5 ppm/yr, Temperature .05 ppm |