DRSL-LPI-1美国OMEGA DRSL-LPI-1
DRSL-LPI-1
过程测量和控制仪器 ? 信号调节器和发射器 ? DRSL-LPI_Series DIN Rail Input Loop-Powered Isolators DRSL-LPI_Series
1 Channel (DRSL-LPI-1) or 2 Channel (DRSL-LPI-2) Input Loop Powered Isolators Powered by the Analog Input Current Signal Loop 1:1 Signal Ratio Low Input Voltage Drop Fast Response Time <5 ms High Conversion Accuracy, <0.1% of Span (0 to 20.5 mA) Slimline 6 mm (0.24") Housing
产品描述 The DRSL-LPI Series DIN rail input loop powered isolators provide a competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or PLC equipment. These units provide isolation and 1:1 conversion of standard current signals and are powered by the analog input current signal loop. The DRSL-LPI series offers isolation between input and output, provides surge suppression and protects control systems from transients and noise. These units also eliminate ground loops and can be used for measuring floating signals. Low power consumption facilitates DIN rail mounting without the need for any air gap. Measurement ranges are factory calibrated. These isolators operates over a wide temperature range from -25 to 70°C (-13 to 158°F). SPECIFICATIONS NUMBER OF CHANNELS DRSL-LPI-1: 1 DRSL-LPI-2: 2 CURRENT INPUT Signal Range (Input to Output): 0 to 20.5 mA Signal Conversion: 1 to 1 Functional Range: 0 to 23 mA (NAMUR NE43 compliant) Start up Current: 10 μA typical Input Overload: 50 mA max Input to Output Voltage Drop: 1.25V + (0.015 x Vout) where Vout = Iout x Routput, typical Input Voltage Drop: (Unit voltage drop) + Vout CURRENT OUTPUT Output Load: 600Ω max Output Load Stability: <0.01% of span/100 Ω (span = 0 to 20 mA) Voltage Limit: 17.5V GENERAL Internal Consumption: 30 mW per channel Isolation Voltage (Test): 2.5 kVac Isolation Voltage (Working): 300 Vac Signal/Noise Ratio: >60 dB Cut-Off Frequency (3 dB): 100 Hz Response Time (0 to 90%, 100 to 10%): <5 ms Absolute Accuracy (at 25°C): ≤±10 μA + 0.05% of max value of selected span Temperature Coefficient: ≤±2 μA/°C EMC Immunity Influence: <±0.5% of span Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span ENVIRONMENTAL Operating Temperature: -25 to 70°C (-13 to 158°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Calibration Temperature: 20 to 28°C (68 to 82°F) Relative Humidity: 0 to 95% RH non-condensing Protection Degree: IP20 Installation Area: Pollution degree 2 and measurement/overvoltage category II MECHANICAL Dimensions: 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5") Weight: 70 g (0.15 lb) approx DIN Rail Type: DIN EN 60715 - 35 mm Wire Size: 0.13 x 2.5 mm2/AWG 26 to 12 stranded wire Screw Terminal Torque: 0.5 Nm
产品编号 产品描述 DRSL-LPI-1 DIN rail input loop-powered isolator, 1 channel DRSL-LPI-2 DIN rail input loop-powered isolator, 2 channel Accessories RAIL-35-1 35 mm (1.4") DIN rail, 1 m (3.3') length DRSL-MOD-STOP Module stop (screwed onto DIN rail to support and hold mounted devices)
粤公网安备 44030402001380号
